High Capacity Liquid Asphalt Storage Tank System | China Suppliers & Factory for Thermal Insulated Storage Solutions
Product Description
A liquid asphalt storage tank is a sealed steel tank used for long-term, large-capacity storage of high-temperature liquid asphalt. It is the core equipment for material storage, thermal insulation, and transfer in asphalt mixing plants, modified asphalt production lines, waterproofing membrane manufacturing, and the carbon industry, providing a stable source of asphalt for the entire production system.
Main Classification
Most commonly used, standard for job sites/asphalt mixing plants. Capacity 5–100 tons, movable, fast installation, small footprint.
Large fixed storage tank, capacity 100–5,000 tons, used for asphalt depots and large mixing plants, high storage capacity.
(Most Recommended) Thermal oil coils arranged inside the tank with an external thermal oil heater. Uniform heating, no asphalt coking or aging, stable temperature control. Industry mainstream.
Fast temperature rise, low cost, suitable for remote job sites. Pay attention to exhaust and explosion protection.
Used for small tanks, clean with no open flame, suitable for waterproofing and small repair projects.
Core Structure (Three-Layer Tank + Systems)
Q235B carbon steel, thickness 6–10 mm, resistant to high-temperature asphalt corrosion. Equipped with internal thermal oil coils, localized rapid heating zone, and ultra-low level asphalt extraction port, allowing complete drainage of asphalt from tank bottom.
100–150 mm high-density rock wool/aluminum silicate, outer layer covered with aluminum sheet cladding. Excellent thermal insulation performance, temperature drop <1°C/h.
Carbon steel protective cladding, weatherproof (rain and sun protection).
- Temperature control system: Automatic temperature control, typical storage temperature 130–160°C.
- Asphalt pump + feed/discharge piping: Connects to melter for feeding and to construction equipment for discharging.
- Safety & Monitoring: Level gauge, pressure gauge, breather valve, manhole, explosion-proof device.
- Optional mixing device: Prevents localized solidification and stratification.
Key Technical Features
Only heats the discharge zone instead of the entire tank, energy-saving, does not degrade overall asphalt quality.
Maintains asphalt in a fluid state throughout storage, preventing solidification, carbonization, and degradation.
Equipped with breather valve and fume collection system, reduces asphalt fume emissions.
Integrates with asphalt melter to achieve a complete system of solid asphalt melting → liquid asphalt storage → continuous discharge.
Common Specifications (Weight / Capacity)
Operating Principle
Difference from Buffer Tank
Large capacity, long-term storage, overall heating, main material storage.
Small capacity, short-term transfer, pressure stabilization and degassing, intermediate link.
Frequently Asked Questions
It is a sealed steel tank designed for long-term, large-capacity storage and thermal insulation of high-temperature liquid asphalt, serving as the central material supply for asphalt mixing plants, waterproofing lines, and related production facilities.
Thermal oil circulation heating is the most recommended method. It uses internal thermal oil coils and an external heater to provide uniform heat distribution without causing asphalt coking or aging.
Horizontal tanks typically offer capacities from 5 to 100 tons, are movable, quick to install, and suit job sites. Vertical tanks range from 100 to 5,000 tons, are fixed structures, and cater to large depots and major mixing facilities.
The system provides automatic temperature control typically between 130–160°C. With a 100–150 mm high-density rock wool/aluminum silicate layer, the temperature drop rate is less than 1°C per hour.
Localized rapid heat extraction concentrates heating only on the discharge area rather than the entire vessel, saving operational energy while preventing unnecessary thermal degradation of the rest of the asphalt.
A liquid asphalt storage tank is built for large-capacity long-term storage and heating, whereas an asphalt buffer tank has a smaller capacity designed for short-term transfer, pressure stabilization, and degassing.
