Leave Your Message

China Suppliers Factory Large Solid Asphalt Melting Tank Equipment for Efficient Heat Exchange and Material Processing

An asphalt melting tank is essential heat exchange equipment designed for efficient asphalt heating. This innovative tank facilitates the melting of solid asphalt materials by applying external heat, increasing their temperature for optimal performance. In China, suppliers offer various types of asphalt melting tanks tailored to specific needs. These tanks can be categorized based on material characteristics into granular asphalt melting tanks and block-shaped asphalt melting tanks. Furthermore, they are divided according to heating mediums, featuring direct heating types (using coal, fuel gas, or fuel oil) and heat transfer oil melting tanks, including electric heating variants. The structure of the melting tanks varies as well, with options for vertical and horizontal designs, as well as different heating tube forms like tube bundle and coil types. Discover high-quality asphalt melting tanks from reliable suppliers and factories in China to enhance your asphalt processing capabilities

    Product Description

    For general melting volumes that are relatively large (2 - 15 t/h), a vertical coil structure is adopted; for smaller melting volumes (1 - 2 t/h), a horizontal tube bundle structure is used; for very small melting volumes (for testing purposes - 100 - 1000 kg/h), an electric heating structure is employed. While for block asphalt, an intermittent (discontinuous) tube bundle structure is generally used.

    Main Structure

    The main structure consists of an asphalt tank body (upward straight and downward conical), a heat transfer oil heating coil (inner and outer coils and conical coil), a stirring system (motor reducer, support), and a support frame (upper and lower supports and columns). It is also equipped with electronic weighing sensors, digital thermometers, a bottom discharge mechanism, an asphalt filter, an asphalt buffer (receiving) tank, etc.

    Working Principle

    1

    The solid asphalt enters the melting zone through the feeding port. In the melting zone, the coil pipe is supplied with heat transfer oil, and under the action of the high-temperature heat transfer oil, the asphalt is heated, melted, and mixed by the agitator to enhance heat transfer and ensure uniform heating; high-quality liquid asphalt is pressed into the secondary heating zone, while the slag material enters the conical storage slag area.

    2

    After the asphalt is heated and melted in the melting zone, under the pressure of the subsequent asphalt, it enters the secondary heating zone from the bottom for further heating, dehydration, and sedimentation of impurities; when the asphalt liquid level in the secondary heating zone reaches the discharge port position and its temperature meets the process requirements, the qualified asphalt is continuously and stably discharged from the discharge port, passes through the asphalt filter, and is transported by the insulated asphalt pump to the liquid asphalt storage tank.

    3

    At the bottom of the asphalt melting tank, there is a liquid asphalt discharge valve and an inspection hole (manhole). When cleaning is needed, open the liquid asphalt discharge valve, and through the asphalt pump, the liquid asphalt is sent to the buffer tank; after confirming that the liquid asphalt has been completely discharged, start the bottom slag discharge mechanism to discharge the settled impurities. Repeat this operation several times until no impurities are discharged, then close the sewage valve, and the sewage is completed; when maintenance is needed, maintenance personnel can enter through the bottom manhole.

    4

    Add a temperature measuring point at the outlet of the asphalt melting tank to keep the asphalt temperature within the set range. Through this temperature measuring point, control the opening degree of the heat transfer oil inlet valve, control the melting speed of the solid asphalt and the temperature of the liquid asphalt, and avoid asphalt aging due to overheating.

    Frequently Asked Questions (FAQ)

    Q: What melting structures are recommended for different operational capacities?

    Vertical coil structures are standard for large volumes (2–15 t/h), horizontal tube bundle structures suit smaller volumes (1–2 t/h), and electric heating structures are optimal for testing purposes (100–1000 kg/h). Intermittent tube bundle designs are used for block asphalt.

    Q: How is thermal aging prevented during the asphalt melting process?

    A dedicated temperature measuring point at the outlet regulates the heat transfer oil inlet valve, controlling both melting speed and discharge temperature to prevent overheating and degradation.

    Q: What function does the secondary heating zone serve?

    The secondary heating zone facilitates secondary temperature raising, moisture dehydration, and impurity sedimentation before the liquid asphalt reaches the discharge port.

    Q: How are sediment and impurities removed from the tank?

    Liquid asphalt is drained into a buffer tank, after which the bottom slag discharge mechanism is engaged repeatedly until impurities are entirely evacuated from the conical lower section.

    Q: What auxiliary monitoring equipment is included in the main structure?

    The equipment integrates electronic weighing sensors, digital thermometers, inline asphalt filters, and dedicated buffer tanks for comprehensive process tracking.